Planet ICA 4200 User Manual Download Page 2

 

Ultra-mini Full HD Fixed Dome IP Camera 

ICA-4200

 

 

 

2

Copyright 

Copyright 

©

 2015 by PLANET Technology Corp. All rights reserved. No part of this 

publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or 
translated into any language or computer language, in any form or by any means, electronic, 
mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written 
permission of PLANET. 
 
PLANET makes no representations or warranties, either expressed or implied, with respect 
to the contents hereof and specifically disclaims any warranties, merchantability or fitness for 
any particular purpose. Any software described in this manual is sold or licensed "as is". 
Should the programs prove defective following their purchase, the buyer (and not PLANET, 
its distributor, or its dealer) assumes the entire cost of all necessary servicing, repair, and 
any incidental or consequential damages resulting from any defect in the software. Further, 
PLANET reserves the right to revise this publication and to make changes from time to time 
in the contents hereof without obligation to notify any person of such revision or changes. 
 
All brand and product names mentioned in this manual are trademarks and/or 
registered trademarks of their respective holders. 
 

Federal Communication Commission Interference Statement   

This equipment has been tested and found to comply with the limits for a Class B digital 
device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable 
protection against harmful interference in a residential installation. This equipment generates, 
uses, and can radiate radio frequency energy and, if not installed and used in accordance 
with the instructions, may cause harmful interference to radio communications. However, 
there is no guarantee that interference will not occur in a particular installation. If this 
equipment does cause harmful interference to radio or television reception, which can be 
determined by turning the equipment off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures: 

1.  Reorient or relocate the receiving antenna. 
2.  Increase the separation between the equipment and receiver. 
3.  Connect the equipment into an outlet on a circuit different from that to which the receiver 

is connected. 

4.  Consult the dealer or an experienced radio technician for help. 
 

FCC Caution   

To assure continued compliance, for example, use only shielded interface cables when 
connecting to computer or peripheral devices. Any changes or modifications not expressly 
approved by the party responsible for compliance could void the user’s authority to operate 
the equipment. 
 
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two 
conditions: 

(

1

This device may not cause harmful interference, and (2) this device must 

accept any interference received, including interference that may cause undesired 
operation.

   

 

Federal Communication Commission (FCC) Radiation Exposure Statement 

This equipment complies with FCC radiation exposure set forth for an uncontrolled 
environment. In order to avoid the possibility of exceeding the FCC radio frequency 
exposure limits, human proximity to the antenna shall not be less than 20 cm (8 inches) 
during normal operation. 

 

Safety 

This equipment is designed with the utmost care for the safety of those who install and use it. 

Summary of Contents for ICA 4200





























































Reviews: