manualshive.com logo in svg

Planet ICA 4200, User Manual

Share
Download
Planet ICA 4200 User Manual Download Page 45

 

Ultra-mini Full HD Fixed Dome IP Camera 

ICA-4200

 

 

 

45

Samba Server Address:

 Input Samba server’s IP address or host 

name. 

Path:

 

Input the path where you want to save file on Samba server, like 

‘upload/record’. 

User Name:

 Input Samba server’s user name. 

Password:

 Input Samba server’s password. 

Test SMB:

 Click this button to test Samba server settings above 

immediately. 

Tips: Some Samba servers do not have username and password 

checks. You can just input Samba server address and path to 
access the file storage space.

 

When you finish with the above settings, click the ‘Apply’ button to save changes. 
 

3.5.10 Recording     

You can save video files on SD card or Samba server.   
 

1. Be sure that the SD Card is formatted by this device.   
2. Unlike motion detection, this function will record video at specified time period 

on selected weekday(s).

 

 

Summary of Contents for ICA 4200





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands