background image

                                                                                                 

 

RTSP Port 

Choose the RTSP port. The RTSP protocol allows a connecting client to start a 
video stream. Enter the RTSP port number to use. The default value is 554.

 

RTP Port

 

Specify the range of transmission port number of video stream. The default range 
is 50000 to 50999. User can specify a number between 1024 and 65535. 

To use the 3GPP function, in addition to previous section, you might need more information or 
configuration to make this function work. 

NOTE: 

To use the 3GPP function, it strongly recommends installing the Networked Device with 
a public and fixed IP address without any firewall protection. 

RTSP Port

 

Port 554 is the default for RTSP service. However, sometimes, some service 
providers change this port number for some reasons. If so, user needs to change 
this port accordingly.   

Dialing procedure

   

 

 

1. Choose a verified player (PacketVideo or Realplayer currently) 

2. Use the following URL to access:   

rtsp://host/mpeg4/media.3gp 

 

Where host is the host name or IP address of the camera. 

Compatible 3G mobile phone

  Please contact your dealer to get the approved list of 

compatible 3G phone. 

 

3.5.5 UPnP 

UPnP is short for Universal Plug and Play, which is a networking architecture that provides 
compatibility among networking equipment, software, and peripherals. This device is an UPnP 
enabled Network Camera. If your operating system is UPnP enabled, the device will automatically 
be detected and a new icon will be added to 

My Network Places.

 If you do not want to use the 

UPnP functionality, it can be disabled 

In addition, this device also provides UPnP IGD function for NAT traversal easily. Use NAT 

 39 

Summary of Contents for ICA-350













































































Reviews: