background image

                                                                                                 

3.3 Live View 

Start-up screen will be as follow no matter an ordinary users or an administrator. 

 

Streaming Protocol

Video Profile

ActiveX Control

Language

Setting Menu

PTZ Control 

2-Way Audio

De-Interlace

Monitor Image Section 

Video Information

 

 

Monitor Image Section

 

The image shot by the ICA-350 is shown here. The date and time are 
displayed at the top of the window. 

Video Profile

 

The ICA-350 support multi-profile for both MEPG-4 and M-JPEG 
simultaneously. User can chose the proper and/or preferred profile 
here. 

ActiveX Control

 

The plug-in ActiveX control supports a lot of functions by clicking the 
left mouse button. Note that this feature only supports on the ActiveX 
control within Microsoft® Internet Explorer.   

2-Way Audio 

*hardware version 2 

The ICA-350 supports 2-way audio function. User can chose to 
enable or disable this function by toggling the icon below 

  : Disable audio uploading function. 

  : Enable audio uploading function.

 

De-Interlace 

The device also supports de-interlace function inside ActiveX. User 
can chose to enable or disable this function by toggling the icon 

 28 

Summary of Contents for ICA-350













































































Reviews: