The following steps demonstrate procedures to view video from remote unit:
•
Start the remote monitoring software by entering the IP Address of the DVR in the Address
bar of the browser. Alternatively, click on the Favorite entry for the unit (if the IP address of
the unit has been set).
•
Enter the Username and password. The login username and password can be saved to ease
future login. The default username and password is admin / 1234.
•
Click <OK> to log in to the DVR. The process may take a few seconds.
•
If the connection is made successfully, the main window will display live video of the attached
cameras.
If the IE browser is closed, the remote system is logout and disconnected from the DVR at
the same time.
5.2.2.2 Software
Upgrades
If a new version of the remote monitoring software is available on the DVR, upgrade will be
prompted while accessing the unit. Follow the steps to upgrade the software.
•
The message as the above figure will be prompted. Click <Yes> to accept version upgrade.
•
Start the IE again and enter the IP address of the DVR in the Address bar of the browser; or if
the unit address is set as a Favorite site, click the Favorites entry for the unit.
•
When the software is completely downloaded and installed, the Login Screen will be
displayed.
-
54
-
