Planet HDP-5240PT User Manual Download Page 47

Page: 47 / 74

720p SIP Multi-unit Video Door Phone with RFID and PoE

HDP-5240PT

SIP

Field Name

Explanation

record.

Response Single Codec

If it is enabled, the device would use single codec in response to an

incoming call request.

Use Feature Code

When this setting is enabled, the features in this section would not be

handled by the device itself but by the server instead. In order to control the

authorization of the features, the device would send feature code to the

server by dialing the number specified in each feature code field.

Specific Server Type

Set the line to collaborate with specific server type.

Registration Expiration

Set the SIP expiration period.

Use VPN

Set the line to use VPN restrict route.

Use STUN

Set the line to use STUN for NAT traversal.

Convert URI

Convert not digit and alphabet characters to %hh hex code.

DTMF Type

Set the DTMF type to be used for the line.

DTMF SIP INFO Mode

Set the SIP INFO mode to send ‘*’ and ‘#’ or ‘10’ and ‘11’.

Transportation Protocol

Set the line to use TCP or UDP for SIP transmission.

SIP Version

Set the SIP version.

Caller ID Header

Set the Caller ID Header.

Enable Strict Proxy

Enables the use of strict routing. When the phone receives packets from

the server, it would use the source IP address, not the address in via field.

Enable user=phone

Sets user=phone in SIP messages.

Enable SCA

Enable/Disable SCA (Shared Call Appearance )

Enable BLF List

Enable/Disable BLF List

Enable DNS SRV

Set the line to use DNS SRV which would resolve the FQDN in proxy

server into a service list.

Keep Alive Type

Set the line to use dummy UDP or SIP OPTION packet to keep NAT

pinhole opened.

Keep Alive Interval

Set the keep alive packet transmitting interval.

Enable Session Timer

Set the line to enable call ending by session timer refreshment. The call

session would be ended if there is not new session timer event updating

received after the timeout period.

Session Timeout

Set the session timer timeout period.

Enable Rport

Set the line to add Rport in SIP headers.

Enable PRACK

Set the line to support PRACK SIP message.

Keep Authentication

Keep the authentication parameters of previous authentication.

Auto TCP

Using TCP protocol to guarantee usability of transport when SIP messages

Summary of Contents for HDP-5240PT











































































Search results

Summary of Contents for HDP-5240PT

Reviews:

Related manuals for HDP-5240PT

Brands by name

Popular brands

Planet HDP-5240PT, User Manual

Search results

Summary of Contents for HDP-5240PT

Reviews:

Related manuals for HDP-5240PT

Brands by name

Popular brands