Planet ERT-805, Manual

Page: 9 / 14

6 7
Chapter 4
Configure Password
1. Once log on to the console, the following screen displayed.
Fig 1: The privilege Screen of ERT-805
2. Types “config terminal” to enter configuration mode. ERT-805 will prompt
“<console>#”
Fig 2: Configuration mode Screen
3. Then type command enable password “abc” to setup the enable privilege password
where abc is the password. ( password can be any alphabetic or numerical with up
to 16 ASCII character is allowed)
Fig 3: configuration for password
4. Key in “end” to close the configure mode and key in “wr” to store the setting and
make the setting activated right away.