Planet ERT-805, Manual

Page: 11 / 14

8 9
Chapter 5.
Configuration IP Address
Follow the step 1 to step 2 on above to go into configure mode. Then type “int s0/0” or
“int Fastethernet 0/0”. After get into the interface, type ip address “ip address” “subnet
mask”. For example: ip address 192.168.99.64 255.255.255.0
Fig 4 IP configuration
And key in “end” to close the configure mode and “wr” to write the setting and make the
setting activated right away.
Now ERT-805 is with a IP address and ready to have further configuration, You can either
stay in the console interface for setup or using Telnet too.
Please refer to the user’s manual to have further configuration.