Planet ENW-1281, User Manual, Page: 22 / 52

19
Making V.110 Connections
1. Execute “ CommCenter ”. And make sure all the settings are well and
correctly configured.
2. Go to My Computer . Make sure Dial-Up Networking (DUN) is well
installed.
3. Double-click “ Make New Connection ”.
4. Name the new connection appropriately. For example, “RVS_V.110”.
5. Select “ RVS ISDN V.110 ” in “ Select a device ” box.
6. Click “ Configure ” button, and specify the V.110 user rate in “ Maximum
speed ” box. Click “ Next ”.
Maximum speed=1200 V.110 user rate = 1200 bps.
Maximum speed=2400 V.110 user rate = 2400 bps.
Maximum speed=4800 V.110 user rate = 4800 bps.
Maximum speed=9600 V.110 user rate = 9600 bps.
Maximum speed=19200 V.110 user rate = 19200 bps.
Maximum speed=38400 V.110 user rate = 38400 bps.
Maximum speed=57600 V.110 user rate = 57600 bps*
* Available only for Japan
If the maximum speed you selected is not in the above list, the
system will automatically adapt the V.110 user rate to the
default setting at 38400 bps.
7. Enter the ISDN phone number of the remote party that you want to call.
8. Click “ Next ”, and click “ Finish ” to complete the setting.
Making V.120 Connections
1. Execute “ CommCenter ”. And make sure all the settings are well and
correctly configured.
2. Double-click “ Make New Connection ”.
3. Name the new connection appropriately. For example, “V.120”.
4. Select “ RVS ISDN V.120 ” in the “ Select a device ” box.