8
6.
From the
Dial-Up Networking
window right-click your newly created
connection. Select
Properties
. On the
General
tab, cancel the selection
of
“ Use area code and Dialing Properties”
and click
OK
.
7.
From the
Start
menu, select
Programs.
Select
Configuration Utility
.
Click
Config
. A dialogue box will prompt you to change the settings to
fit your needs.
8.
Select the proper switch type corresponding to your need.
Switch Type
varies between countries. Although you have the option of “
Automatic
”
as a selection, it is highly recommended that you chose a specific
selection, to reduce the chance of incompatibility. Typically the
selections are as follows:
Areas
Switch Types
Canada & United States
Northern Telecom & NI-1
Japan
INS Net 64
Taiwan
DSS1 (ETSI)
Europe
DSS1 (ETSI)
9.
Enter the ISDN phone numbers and the Service Profile Identifier. Number
(SPID) will be supplied by your local ISDN telephone company.
[NOTE: With the
“INS Net 64”
&
"DSS1 (ETSI)”
switch types, there are no SPID’s to be entered.]
10.
Now you are ready to connect the ISDN TA PC card to your system.
Refer to the Hardware Installation section for details.