5
Chapter 2
Installation
Connecting the DMA-100
This chapter describes the different topologies of the DMA-100 and how to connect
and setting the topology with your PC and TV.
Under every situation the DMA-100/DMA100W must be wired to the TV or other dis-
play device. The following image shows the rear panel of the DMA-100 and the TV.
As you can see in the above diagram the composite Audio / Video cable is connected
from the
DMA-100
to the same ports of the TV.
One PC to One TV
After you have connected the composite audio / video cable to your TV, connect the
cross-over RJ-45 cable to your PC.
Follow the steps below to assign an IP address to the
DMA-100
.
SETP 1:
Switch the TV into AV1 or AV2 mode, depending on how you have connected
the composite audio / video cable.
SETP 2:
You will then see the main menu with three options. The image below depicts
the main menu.
2
