Check to send reverse polarity before caller ID.
Reverse Polarity before Caller
ID
Default :
Disable
Check to send short ring before caller ID.
Short Ring before Caller ID
Default :
Disable
Check to send dual tone before caller ID.
Dual Tone before Caller ID
Default :
Disable
Check to send caller ID before first ring.
Caller ID Prior First Ring
Default :
Enable
Set caller ID DTMF start digit.
Caller ID DTMF Start Digit
Default :
DTMF_A
Set caller ID DTMF end digit.
Caller ID DTMF End Digit
Default :
DTMF_C
Set Minimum and Maximum Flash time.
Flash Time Setting (ms)
[ Space:10, Min:30, Max:2000 ]
Default :
200 ~ 500
Set Speaker voice volume.
Speaker Voice Gain (dB)
[ -32~31 ],Mute:-32
Default :
0
Set microphone voice gain volume.
Mic Voice Gain (dB)
[ -32~31 ],Mute:-32
Default :
0
Tone
User can adjust the items of the “Call Control” when in VoIP communication. And, basically system
will use the following default setting values if user does not want to change them.
- Select Country
User can select country to specify tone parameters (Dial Tone,
Ring Tone, Busy Tone, and Waiting Tone). If user wants to set
tone manually, please select CUSTOMER. After selecting
CUSTOMER, user can assign Custom 1 to 8 for each tone.
Country
Default :
TAIWAN
-
30
-
