Planet ATA-150 Series User Manual Download Page 34

Page: 34 / 50

Mode

There are TFTP / FTP and HTTP three ways to provide the auto

upgrade function.

TFTP Server Address

Input the TFTP Server address, and it could input the IP or

Domain Name form.

HTTP Server Address

Input the HTTP Server address, and it could input the IP or

Domain Name form.

HTTP File Path

Set up the file path.

FTP Server Address

Input the FTP Server address, and it could input the IP or

Domain Name form.

FTP Username

The login username.

FTP Password

The login password

FTP Path

Set up the file path.

Check new firmware

The ATA will according to the below ways to check the new

firmware.

- Power On

: The machine will check the new firmware

when power on and following the scheduling date and

time.

- Scheduling

: The machine will follow the scheduling date

and time to check the new firmware.

Scheduling Day

The ATA will check the new firmware every the interval time. The

range is 1~30 days.

Scheduling Time

The ATA will check the new firmware between the time range by

random.

Automatic Updat

There are Notify only and Automatic ways to update.

- Notify only

: If there are new firmware, the ATA will send

the “Be Be Be” sounds when pick up the handset to

prompt there are new firmware.

- Automatic

: The ATA will carry firmware update out

automatically.

File Prefix

It will check the information of model name.

Next update time

It will show the next check date and time.

Summary of Contents for ATA-150 Series



















































Search results

Summary of Contents for ATA-150 Series

Reviews:

Related manuals for ATA-150 Series

Brands by name

Popular brands

Planet ATA-150 Series, User Manual

Search results

Summary of Contents for ATA-150 Series

Reviews:

Related manuals for ATA-150 Series

Brands by name

Popular brands