In this page, you can test the IP address on the same segment connect status of
the device. Click
Ping
to run diagnostics.
3.4.5 Log Configuration
Choose
Management
>
Log Configuration
. The
SYSTEM LOG
page as shown
in the following figure appears:
In this page, you can enable the log function. You can set
Mode
to
Local
,
Remote
, or
Both
.
Local
indicates to save the log in the local computer.
Remote
indicates to send the log to the remote log server.
Both
indicates to save the log
in the local computer and the remote log server.
To log the events, do as follows:
Step 1
Select
Enable Log
.
Step 2
Select a mode from the drop-down list.
If you select
Remote
or
Both
, enter the IP address and port number of
the server.
Step 3
Click
Apply
to apply the settings.
Step 4
Click
View System Log
or
View Firewall Log
to view the detail
information of the system log.
80
