3.3.1.4 WPS
Settings
In the
ADVANCED WIRELESS
page, click
WPS Setting
. The
WIRELESS WPS
page as shown in the following figure appears:
Enabled
: The WPS service is enabled by default.
Note:
Ensure that the network card supports the WPS function.
Field
Description
Select Mode
Select
Enrollee
or
Registrar
from the drop-down list.
Configuration State
Select
Configured
or
unconfigured
from the
drop-down list.
Input Station PIN
If you are using the PIN method, you need a Registrar,
either an access point or a wireless router, to initiate the
registration between a new device and an active access
point or a wireless router.
You can use one of the following there methods to use WPS authentication:
38
Press
the
WPS
button on the side panel for 3 seconds.
