UPnP is widely applied in audio and video software. It automatically searches
devices in the network. If you are concerned about UPnP security, you can
disable it. Select the WAN and LAN interfaces at which you want to enable UPnP
and click
Apply
to save the settings.
3.3.11.4 ADSL
Settings
In the
NETWORK TOOLS
page, click
ADSL
. The page as shown in the following
figure appears:
In this page, you can select the ADSL modulation. Normally, you are
recommended to keep the factory defaults. The device supports the following
modulation types: G.Dmt, G.lite, T1.413, ADSL2, AnnexL, ADSL2+, and AnnexM.
The device negotiates the modulation mode with the DSLAM.
Click
Apply
to save the settings.
3.3.11.5 SNMP
In the
NETWORK TOOLS
page, click
SNMP
. The page as shown in the following
figure appears:
62