Wireless ADSL Router User
’
s Manual
62
will be allowed by the Default rule.
•
ALLOW rules are only useful if the traffic is already covered by
a BLOCK rule. (That is, you wish to allow a subset of traffic
which is currently blocked by another rule.)
•
To define the Schedule used in these selections, use the
"Schedule" screen.
LAN Users
Select the desired option to determine which PCs are covered by
this rule:
•
Any
- All PCs are covered by this rule.
•
Single PC
- Only the selected PC is covered by this rule.
If selected, you must select the PC.
PC
- If using Single PC above, select the PC or Server on your
LAN which will be covered by this rule.
WAN Users
These settings determine which packets are covered by the rule,
based on their source (WAN) IP address. Select the desired
option:
•
Any
- All IP addresses are covered by this rule.
•
Address range
- If this option is selected, you must enter the
"Start" and "Finish" fields.
•
Single address
- Enter the required address in the "Sin-
gle/Start" fields.
Log
This determines whether packets covered by this rule are logged.
Select the desired action.
•
Always
- always log traffic considered by this rule, whether it
matches or not. (This is useful when debugging your rules.)
•
Never
- never log traffic considered by this rule, whether it
matches or not.
•
Match
- Log traffic only it matches this rule. (The action is
determined by this rule.)
•
Not Match
- Log traffic which is considered by this rule, but
does not match (The action is NOT determined by this rule.)
