Planet ADE-4301A User Manual Download Page 81

Page: 81 / 107

Wireless ADSL Router User

’

s Manual

Config File

This feature allows you to download the current settings from the ADE-4301/ADW-
4301, and save them to a file on your PC.

You can restore a previously-downloaded configuration file to the ADE-4301/ADW-
4301, by uploading it to the ADE-4301/ADW-4301.

This screen also allows you to set the ADE-4301/ADW-4301 back to its factory default
configuration. Any existing settings will be deleted.

An example

Config File

screen is shown below.

Figure 60: Config File Screen

Data - Config File Screen

Backup Config

Use this to download a copy of the current configuration, and
store the file on your PC. Click

Download

to start the download.

Restore Config

This allows you to restore a previously-saved configuration file
back to the ADE-4301/ADW-4301.

Click

Browse

to select the configuration file, then click

Restore

upload the configuration file.

WARNING !

Uploading a configuration file will destroy (overwrite) ALL of the
existing settings.

Default Config

Clicking the

Factory Defaults

button will reset the ADE-

4301/ADW-4301 to its factory default settings.

WARNING !

This will delete ALL of the existing settings.

Summary of Contents for ADE-4301A












































































































Search results

Summary of Contents for ADE-4301A

Reviews:

Related manuals for ADE-4301A

Brands by name

Popular brands

Planet ADE-4301A, User Manual

Search results

Summary of Contents for ADE-4301A

Reviews:

Related manuals for ADE-4301A

Brands by name

Popular brands