ADE-4100 User Manual
16
Fixed IP for WAN
If your ISP has assigned static IP address, you may connect to the Internet by using
a fixed, or static address. To set up a Fixed IP for WAN, do the following steps as
an example.
Step 1
Enter the information of
Static IP Address
,
Subnet Mask
and
Gateway
provided
by ISP. Note: These parameters are required for building up connection. If one of
these information incorrect or unavailable, please contact your ISP for correct
information.
Figure 4-9:
Fixed IP set-up screen
Step 2
Choose suitable packet encapsulation (1483 Bridged/ Routed LLC, 1483 Bridged/
Routed Mux, Classical IP over ATM). And
Disable
“
Bridge
”
function.
Step 3
Click
“
submit
”
to commit modifications you
’
ve done, then click
“
Save Configura-
tion
”
to store settings. (Modifications will not take effects until next reboot.)
Step 3
Click on
“
NAT
”
tab on left panel, and
enable
the
NAPT
function in the option menu.
Step 4
Click
“
Save settings
”
on left panel to write configuration into machine, and reboot
to make settings effective.
Dynamic IP for WAN
If ISP provides a dynamic IP for Internet connection, following steps illustrate how
to enable the connection via ADE-4100.
Step 1
Choose suitable packet encapsulation (1483 Bridged/ Routed LLC, 1483 Bridged/
Routed Mux, Classical IP over ATM). And
Disable
“
Bridge
”
function.
Step2
Check the
DHCP
option, and fill in the Host Name field (if required.) (This informa-
tion should be obtained from ISP. If there is no special demand for this, leave this
column blank.)
