The following table describes the labels in this screen.
Parameter Description
Encapsulation
Select your encapsulation type from the dropdown list.
Static IP Address
Enter the static IP Address here.
IP Subnet Mask
Enter the IP Subnet Mask here.
Gateway
Enter the Gateway address here.
NAT
Select whether NAT is Enabled or Disabled.
Default Route
Select whether this PVC will be the default route for
Internet data.
Dynamic Route
Select the RIP type and direction from the dropdown lists.
Multicast
Select the multicast protocol you wish to use from the
dropdown list.
(3) PPPoA / PPPoE
Select this option if your ISP requires you to use a PPPoE connection. This option is
typically used for DSL service. Select Dynamic PPPoE to obtain an IP address
automatically for your PPPoE connection. Selection Static PPPoE to use static IP
address for your PPPoE connection. Please enter the information accordingly.
28
Summary of Contents for 802.11n Wireless ADSL 2/2+ Router ADN-4000
Page 1: ...802 11n Wireless ADSL 2 2 Router ADN 4000 User s Manual ...
Page 6: ...Appendix A Glossary 85 ...
Page 16: ......
Page 19: ...Home Screen 19 ...
