Planet 802.11n Wireless ADSL 2/2+ Router ADN-4000 User Manual Download Page 8

Page: 8 / 91

ADSL and Internet connection to determine the connection method used by your ISP.

PPPoE, PPPoA, Direct Connection Support

Various WAN connections are supported by

ADN-4000.

Fixed or Dynamic IP Address

On the Internet (WAN port) connection, the ADN-4000 supports

both Dynamic IP Address (IP Address is allocated on connection) and Fixed IP Address.

Advanced Internet Functions

Virtual Servers

This feature allows Internet users to access Internet servers on your LAN. The

required setup is quick and easy.

DMZ Support

The ADN-4000 can translate public IP addresses to private IP address to allow

unrestricted 2-way communication with Servers or individual users on the Internet. This provides

the most flexibility to run programs, which could be incompatible in NAT environment.

Firewall

Supports simple firewall with NAT technology and provides option for access control

from Internet, like Telnet, FTP, TFTP, HTTP, SNMP, and ICMP services. It also supports

IP/MAC /Application/URL filtering.

Universal Plug and Play (UPnP)

UPnP allows automatic discovery and configuration of the

Broadband Router. UPnP is supported by Windows ME, XP, or later.

Dynamic DNS Support

When used with the Virtual Servers feature, allows users to connect to

Servers on your LAN using a Domain Name, even if you have a dynamic IP address which

changes every time you connect.

VPN Pass through Support

PCs with VPN (Virtual Private Networking) software using PPTP,

L2TP, and IPSec are transparently supported - no configuration is required.

RIP Routing

It supports RIPv1/2 routing protocol for routing capability.

Simple Network Management Protocol (SNMP)

It is an easy way to remotely manage the router

via SNMP.

Wireless Features

Standards Compliant

The ADN-4000 complies with IEEE 802.11n (Draft 2.0) wireless

technology capable of up to 300Mbps data rate.

Three detachable antennas with MIMO technology

The ADN-4000 provides farther coverage,

less dead spaces and higher throughput with 2T3R MIMO technology.

Support IEEE 802.11b, g and 802.11n Draft 2.0 Wireless Station

The 802.11n standard

provides for backward compatibility with the 802.11b and 802.11g standard, so 802.11b, 802.11g,

and 802.11n Draft 2.0 can be used simultaneously.

WEP support

Support for WEP (Wired Equivalent Privacy) is included. Key sizes of 64 Bit and

128 Bit are supported.

WPS Push Button Control

The ADN-4400 supports WPS (Wi-Fi Protected Setup) to easy

connect wireless network without configuring the security.

WPA-PSK support

WPA-PSK_TKIP and WAP-PSK_AES encryption are supported.

Wireless MAC Access Control

The Wireless Access Control feature can check the MAC address

(hardware address) of Wireless stations to ensure that only trusted Wireless Stations can access

your LAN.

Summary of Contents for 802.11n Wireless ADSL 2/2+ Router ADN-4000




























































































Search results

Summary of Contents for 802.11n Wireless ADSL 2/2+ Router ADN-4000

Reviews:

Related manuals for 802.11n Wireless ADSL 2/2+ Router ADN-4000

Brands by name

Popular brands

Planet 802.11n Wireless ADSL 2/2+ Router ADN-4000, User Manual

Search results

Summary of Contents for 802.11n Wireless ADSL 2/2+ Router ADN-4000

Reviews:

Related manuals for 802.11n Wireless ADSL 2/2+ Router ADN-4000

Brands by name

Popular brands