Planet 802.11g Wireless Access Point / Bridge WAP-4000 User Manual Download Page 29

Page: 29 / 57

- 24 -

6. The client validates the digital certificate, and replies its own digital certificate to the RADIUS server.

7. The RADIUS server validates client

’

s digital certificate.

8. The client and RADIUS server derive encryption keys.

9. The RADIUS server sends WAP-4000 a RADIUS ACCEPT message, including the client

’

s WEP key.

10. WAP-4000 sends the client an EAP Success message along with the broadcast key and key length,

all encrypted with the client

’

s WEP key.

4.2 RADIUS Server Setup

4.2.1 Required Services

After Windows 2000 server has been installed, please install Service Pack 2 also and other latest
security patch.

Furthermore, the following service components are needed:

Active Directory (Please consult with your network administrator or an engineer who is familiar with

Windows 2000 server to install Active Directory; otherwise your system or network might be
unstable.)

IAS (Internet Authentication Service)

Web Server (IIS)

Certificate Service

4.2.2 Setup Procedure

1. Login into Windows 2000 Server as Administrator, or account that has Administrator authority.

2. Go to

Start

Control Panel

, and double-click

“

Add or Remove Programs

”

3. Click on

“

Add/Remove Windows components

”

4. Check

“

Certificate Services

”

, and click

“

Next

”

to continue.

5. Select

“

Enterprise root CA

”

, and click

“

Next

”

to continue.

Summary of Contents for 802.11g Wireless Access Point / Bridge WAP-4000


























































Search results

Summary of Contents for 802.11g Wireless Access Point / Bridge WAP-4000

Reviews:

Related manuals for 802.11g Wireless Access Point / Bridge WAP-4000

Brands by name

Popular brands

Planet 802.11g Wireless Access Point / Bridge WAP-4000, User Manual

Search results

Summary of Contents for 802.11g Wireless Access Point / Bridge WAP-4000

Reviews:

Related manuals for 802.11g Wireless Access Point / Bridge WAP-4000

Brands by name

Popular brands