- 5 -
Chapter 3 Configuring the Wireless Access Point
WAP-4000 can be configured via web browser or bundled utility. It is strongly recommended to configure
and manage WAP-4000 using a wired LAN computer.
3.1 Configure through Web Browser
Web configuration provides a user-friendly graphical user interface (web pages) to manage your
WAP-4000. An AP with an assigned IP address (e.g. http://192.168.1.1) will allow you to monitor and
configure via web browser (e.g., MS Internet Explorer or Netscape).
1. Open your web browser.
2. Enter the IP address of your WAP-4000 in the address field (default IP address is
http://192.168.1.1
).
Please note that your PC
’
s IP address should be on the same IP subnet of the WAP-4000. For
example, you can configure your PC
’
s IP address to 192.168.1.2 if WAP-4000 is with IP 192.168.1.1.
3. A User Name and Password dialog box will appear. Please enter your User Name and Password here.
Default User Name and Password are both
“
admin
”
. Click Ok.
4. Then you will see the WAP-4000 web configuration page.
