Unless the
LAN Only
is selected, you can choose one of the three options,
Static IP
,
DHCP
, and
PPPoE
from the
Type
list for your configuration. Select
LAN Only
check box to disable WAN, and only
default router and DNS settings are applicable. Select
MAC Clone
to change the WAN MAC address.
Select
Yes
to allow WAN to respond PING request.
4.3.1
Static IP
You can click
Static IP
in the
Type
list, and manually configure the following information:
•
IP Address
•
Netmask
•
Default gateway IP address
•
Primary, secondary or third DNS servers
Click
Apply
to submit.
4.3.2
DHCP
Simply click
DHCP
in the
Type
list, and click
Apply
. The acquired IP address, netmask, default
gateway and DNS server information will show when revisit this page later.
4.3.3
PPPoE
1. Click
PPPoE
in the
Type
list.
2.
Enter a user name and its password in
User Name
and
Password
boxes.
3. Click
Apply
.
The PPPoE dialing will start right away. When there is an active connection, the page will show the
acquired IP address, network mask, default gateway and DNS server information.
4.3.4
Allow WAN to Respond PING
Select this option if appropriate and click
Set
. If enabled, the WAN port of IP PBX will respond PING to
the originator.
4.3.5
LAN Only
Select
LAN Only
to disable WAN IP settings but allow the configuration of default gateway and
primary/secondary/third DNS servers.
23
