ICA-HM100W
1.
Audio/Video
Output Jack
Audio-out Jack allows this device to output audio or alerting sound.
2.
RJ-45 LAN
Socket
The LAN socket is a RJ-45 connector for connections to 10/100Base-TX
Fast Ethernet cabling. This Ethernet port built N-Way protocol can detect
or negotiate the transmission speed of the network automatically. Please
use CAT-5 cable to connect the IP camera to a 100Mbps Fast Ethernet
network switch or hub. The ICA-HM100 LAN socket is compliant with
IEEE802.3af standard PoE interface.
3.
Power Jack
The input power is DC 12V.
4.
Factory
Default Reset
This button is used to restore the all factory default settings. Sometimes
restarting the device will make the system back to a normal state.
However, if the system still got problems after restart, user can restore the
factory default settings and install it again.
Restore the device:
a. Insert the paper clip or other tool and press and hold the
button down continuously.
Hold it at least 5 seconds and release the tool. Then the device has been
restored to default settings and reboot again.
5
