![background image](http://html.mh-extra.com/html/planet-networking-and-communication/hdp-5260pt/hdp-5260pt_user-manual_1563832053.webp)
720p SIP Multi-unit Apartment Vandalproof Door Phone with RFID & PoE
HDP-5260PT
53
Auto Provision
Field Name
Description
Password
Password for configuration server. Used for FTP/HTTP/HTTPS.
Config Encryption Key
Encryption key for the configuration file
Common Config Encryption Key
Encryption key for common configuration file
Download Fail Check Times
Download failed and check times
Save Auto Provision Information
Save the auto provision username and password in the phone until the
server URL changes
Download CommonConfig
enabled
Enable or disable download commonconfig
Download DeviceConfig
enabled
Enable or disable download deviceconfig
DHCP Option Settings
DHCP Option Setting
The equipment supports configuration from Option 43, Option 66, or a
Custom DHCP option. It may also be disabled.
Custom DHCP Option
Custom option number. Must be from 128 to 254.
Plug and Play (PnP) Settings
Enable PnP
If this is enabled, the equipment will send SIP SUBSCRIBE messages to a
multicast address when it boots up. Any SIP server understanding that
message will reply with a SIP NOTIFY message containing the Auto
Provisioning Server URL where the phones can request their
configuration.
PnP server
PnP Server Address
PnP port
PnP Server Port
PnP Transport
PnP Transfer protocol – UDP or TCP
PnP Interval
Interval time for querying PnP server. Default is 1 hour.
Phone Flash Settings
Server Address
Set FTP/TFTP/HTTP server IP address for auto update. The address can
be an IP address or Domain name with subdirectory.
Config File Name
Specify configuration file name. The equipment will use its MAC ID as the
config file name if this is blank.
Protocol Type
Specify the Protocol type: FTP, TFTP or HTTP.
Update Interval
Specify the update interval time. Default is 1 hour.
Field Name
Description
Update Mode
1. Disable – no update
2. Update after reboot – update only after reboot.