![background image](http://html.mh-extra.com/html/planet-networking-and-communication/hdp-5260pt/hdp-5260pt_user-manual_1563832019.webp)
720p SIP Multi-unit Apartment Vandalproof Door Phone with RFID & PoE
HDP-5260PT
19
Step 4: Back Panel Fixing and Cabling
A. Select the hole for cable supply; cable length of 15cm to 20cm is recommended.
B. With 4 TA5 x 40mm screws, tighten the back panel on the wall as shown in Figure 6.
The direction of the cable hole on the back panel should be pointing down.
C. Connect the cables of RJ45, power, and electric-lock to the motherboard socket as mentioned in
connectors description (refer to Section 2).
D. Test whether there is electricity by doing the following:
Press the
#
button for 3 seconds to get the IP address of intercom by voice. Input access password or
press the indoor switch to check electric-lock installation.
Do not precede mounting until you have finished checking the electricity!
Figure 6
Figure 7
cm
x 40 mm