![background image](http://html.mh-extra.com/html/planet-networking-and-communication/hdp-5260pt/hdp-5260pt_user-manual_1563832047.webp)
720p SIP Multi-unit Apartment Vandalproof Door Phone with RFID & PoE
HDP-5260PT
47
Door Phone
Field Name
Description
Initial Value
password length is 4.
Description
Device description displayed on IP scanning tool
software.
HDP-5260PT Video
Sip Door phone
Enable Access Table
Enable Access Table: enter <Access Code> for
opening door during calls.
Disable Access Table: enter <Remote Password> for
opening door during calls.
Enable
Hot Key Dialed Mode
Selection
<Primary/Secondary> mode allows system to call
primary extension first; if there is no answer, it would
cancel the call and then call secondary extension
automatically.
<Day/Night> mode allows system to check the calling
time belonging to Day or Night time, and then decide
to call number 1 or number 2 automatically.
Users just press speed dial key once.
Primary /secondary
Call Switched Time
The period between hot keys dialing to the first and
second number.
16 seconds
Day Start Time
The start time of the day when you select
<Day/Night> mode.
06:00
Day End Time
The end time of the day when you select <Day/Night>
mode.
18:00
Address of Log Server
Log server address (IP or domain name)
0.0.0.0
Port of Log Server
Log server port (0-65535)
514
Enable Log Server
Enable or disable to connect with log server
Disable
Enable Indoor Open
Enable or disable to use indoor switch to unlock the
door.
Enable
Enable Card Reader
Enable or disable card reader for RFID cards.
Enable
Limit Talk Duration
If enabled, calls would be forced to end after talking
time is up.
Enable
Door Unlock Indication
Indication tone for door unlocked. There are 3 types of
tone: silent, short and long beeps.
Long beep
Remote Access Code
Check Length
The remote access code length would be restricted
with it. If the input access code length is matched with
it, system would check it immediately.
4