FIG-1
10
GTEK170R
If the OLED board is unplugged from the 170R circuit board it is still
possible to operate the marker.
FIG-1
To switch the 170R on press and hold the Select button
A
.
Release the Select button when the LED
B
lights up and the power
up sequence will begin. At the end of the power up sequence the LED
Indicator will show the status of the breech sensor (see table 1).
1,2
TABLE 1
LED COLOUR
BREECH SENSOR (BS) STATUS
FLASHING YELLOW
BS enabled. NO paintball detected.
Marker WILL NOT fire.
FLASHING LIGHT BLUE
BS enabled. Paintball detected.
Marker WILL fire.
FLASHING PURPLE (SLOW)
BS disabled.
Marker WILL fire.
FLASHING PURPLE (FAST)
Blockage detected. BS disabled.
Marker WILL fire.
To switch the 170R off press and hold the Select button. Release the
Select button when the LED turns red. The 170R will now switch off.
1
When the 170R is turned on, the breech sensor is automatically enabled.
2
The LED colours displayed during the power up sequence may vary depending on which
part of the world the marker was originally purchased.
QUICK START
SWITCHING THE 170R ON/OFF
(LED)
A
B
Summary of Contents for GTEK170R
