11
20
11.To do setup
To do setup, tap the icon in the Main Menu to turn to
SETUP interface as right.
In the interface, select one of GENERAL, TIME, AUDIO,
VIDEO ,RADIO , STEERING WHEEL CONTROL,
CALIBRATE by tapping them, then set them by tapping
some icons on the right side accordingly.
STEERING WHEEL CONTROL: press one button on the
steering wheel then the LCD will show KEY 1 setting, select
the function (such as vol control ,seeking, mute ,power
etc)and then tap it to confirm. It can support mostly 6
shortcut keys. Press reset can cancel all the setting.
AUDIO: Tap the icon to pop up the AUDIO setup interface
as right. you can adjust the Subwoofer VOL here.
Note: In radio mode, the password is 888888.
3. Radio Operation
1. Enter RADIO mode
When you use SRC button or Mode Menu to enter RADIO
mode, it will display RADIO interface as right.
In RADIO interface, tapping the icon can enter Mode
Menu; during playback ,tapping the icon can
turn to frequency interface as right; the other icons are
same as ones in the unit panel or in the Remote Control.
In menu set interface, you can adjust MUTE, APS, EQ,
TA, AF, PTY as right.
2. BAND BUTTON
In RADIO mode, press the BAND button on the remote
control to select your desired radio band of FM1, FM2, FM3,
AM1 and AM2, and the word means which band is selected
will be displayed on the small monitor of the front panel.
3. TUNE/SEEK UP/DOWN BUTTONS
1) Press and hold the >>|/|<< button to automatically search
up/down for an available station from current frequency.
2) Briefly press the >>| / |<< button to manually search up or down with step by step for your
desired station from the current frequency.
4. APS BUTTON
1)When pressing and holding the APS button,the radio searches from the lowest frequency
and checks the signal strength level until 1 cycle search is finished. And then the 6 strongest
stations are preset to the corresponding preset number memory bank. The AS operation is
implemented in the each bank of the selected band. When the AS operation is finished, it
will scan each preset station for 5 seconds in FM or AM band from M1 as briefly pressing
APS button. After finishing a circle of scanning , it will resume broadcasting on the M1.
(It can store 3x6 stations for FM and 2x6 stations for AM in all)
2) When briefly pressing the APS button, the radio will scan each preset station for 5
seconds in FM or AM band from M1. After finishing a circle of scanning, it will resume
broadcasting on the M1.
NOTE: In FM band, FM1,FM2,FM3 is checked one at a time; In AM band, AM1, AM2 is
checked one at a time.
RADIO interface
GENERAL SETUP
RADIO interface
ZOOMx2,ZOOMx3,ZOOMx4,ZOOMx1/2,ZOOMx1/3,ZOOMx1/4,ZOOM OFF.
Press one of the ^/v/>/< buttons to select the area you want to enlarge.
5.16 Change the Caption Language
When playing DVD's ,press the SUBTITLE button repeatedly to
select the language of the caption or turn off the caption.(depend on the
media used.)
When playing VCD/MP3/WMA/CD discs,the buttons are not available.
5.17 Change the Audio Language
1. When playing DVD discs , press the AUDIO button repeatedly
on the IR remote controller to select the desired language type.
(depend on the media used)
2. When playing VCD discs , press the AUDIO button repeatedly to
select the sound mode of the MONO L, MONO R, MIX MONO and
Stereo, no language function.
3. When playing CD/WMA/MP3 media , the AUDIO button is invalid.
5.18
1. When playing DVD discs , press the OSD button repeatedly on the
remote controller to turn on/off the playback status. When it is on, it will
display the information such as: the serial number of the playing title, the
serial number of the playing chapter, the elapsed time of the playing chapter,
the remained time of the playing chapter, the elapsed time of the playing title,
the remained time of the playing title, etc.
2. When playing VCD/CD discs , press the OSD button repeatedly on the
remote controller to turn on/off the playback status. When it is on, it will
display the information such as: the serial number of the playing track, the
elapsed time of the playing track, the remained time of the playing track, the
elapsted time of the disc, the remained time of the disc.
3. When playing MP3/WMA media , press the OSD button repeatedly on
the remote controller to turn on/off the playback status. When it is on, it will
display the information such as: the serial number of the playing track, the
elapsed time of the playing track, the remained time of the playing track.
Overview of Playback Status
Summary of Contents for PI9760
Page 1: ......
