Planar VM55LX-U, User Manual

Page: 21 / 37

Video
VM Series Displays RS232 User Guide
020-1359-00A
Page | 21
13.3 Video Parameters Set
Bytes Bytes Description Bits Description
DATA[0]
0x32 = Video Parameters-
Set Command to change the current video
parameters
DATA[1] Brightness
0 to 100 (%) of the user selectable range of the
display
DATA[2] Color
0 to 100 (%) of the user selectable range of the
display
DATA[3] Contrast
0 to 100 (%) of the user selectable range of the
display
DATA[4] Sharpness
0 to 100 (%) of the user selectable range of the
display
DATA[5] Tint (Hue)
0 to 100 (%) of the user selectable range of the
display
DATA[6] Black Level
0 to 100 (%) of the user selectable range of the
display
DATA[7] Gamma Selection
0x01= Native, 0x02 = S gamma, 0x03 = 2.2,
0x04 = 2.4,
0x05 = D-image(DICOM gamma)
Example: Set all video parameters to 0x37 (55 %) (Display Address 01)
Header
Monitor
ID
Category Code0 Code1 Length
Data
Control
Data[0] Data[1] Data[2] Data[3] Data[4] Data[5] Data[6] Data[7] Checksum
0xA6 0x01 0x00 0x00 0x00 0x0A 0x01 0x32 0x37 0x37 0x37 0x37 0x37 0x37 0x03 0xAC
13.4 Color Temperature Get
Bytes Bytes Description Bits Description
DATA[0]
0x35 = Color Temperature-
Get Command requests the display to report its
current color temperature.
Example: (Display Address 01)
Header Monitor ID Category Code0 Code1 Length Data Control Data[0] Checksum
0xA6 0x01 0x00 0x00 0x00 0x03 0x01 0x35 0x90