background image

 1

Operation Instructions 

Thank you for purchasing the PXL2240MW multi-touch LED monitor. Please read this guide 
thoroughly before installation. 

 
FCC RADIO FREQUENCY INTERFERENCE STATEMENT   
WARNING: (FOR FCC CERTIFIED MODELS)

 

 

This LED Monitor has been tested and found compliant with the limits for a Class B digital device, 
pursuant to part 15 of the FCC Rules. These limits are designed to provide proper protection 
against harmful interference to a residential installation. This Touch LED LCD Monitor generates, 
uses, and can radiate radio frequency energy. Harmful interference to radio communication may 
be the result if it‘s not properly installed and used. However, there is no guarantee that 
interference will not occur in a particular installation. If this Touchscreen LED Monitor does cause 
serious interference to radio or television reception, resetting may correct it. Moreover, users are 
encouraged to reduce interference by doing one or more of the following:   

 

 

Reorient or relocate the receiving antenna. 

 

Move the Touch LED LCD Monitor and the receiver further away from each other. 

 

Connect the Touch LED LCD Monitor into an outlet on a circuit different from that to which 
the receiver is connected.

 

 

Consult your local dealer or a qualified technician.

 

 

 

FCC Warning: 

To assure a continued FCC compliance, a user must use a grounded power supply cord and the 
provided shielded video interface cable with bonded ferrite cores. Also, any unauthorized 
changes or modifications to this Touch LED LCD Monitor would void the user‘s authority to 
operate this device. 

 
Note: 

If necessary, shielded interface cables and AC power cord must be used to meet the 

emission level limits.

 

 

 
 
 

 

 

 

According to WEEE regulation, this Touch LED LCD Monitor can't be handled as normal trash in Europe when 
it is out of usage. Please refer to the recycle information on Planar’s website to handle it. 
For more information on how to recycle your product, please visit http://www.planar.com/about/green/ 

Summary of Contents for PXL2240MW




















Reviews: