background image

                                                                                                                                       

 

1

FCC Information 

 
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a 
residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not 
installed and used in accordance with the instructions, may cause harmful interference to radio communications. 
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does 
cause harmful interference to radio or television reception, which can be determined by turning the equipment off 
and on, the user is encouraged to try to correct the interference by one or more of the following measures: 

 

  Reorient or relocate the receiving antenna. 

  Increase the separation between the equipment and receiver. 

  Connect the equipment into an outlet on a circuit different from that to which the receiver is  

    connected. 

  Consult the dealer or an experienced radio/TV technician for help. 

 

FCC Warning: 

 

To assure continued FCC compliance, the user must use the provided grounded power supply cord and the 
provided shielded video interface cable with bonded ferrite cores. Also, any unauthorized changes or 
modifications to this TFT LCD would void the user's authority to operate this device. 

 

Department of Industry Canada (IC) Compliance Notice 

 

The digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in 
the Radio Interference Regulations of the Canadian Department of Communications. 

   

   
 

SAFETY PRECAUTIONS 

 

Caution

:  Use a power cable that is properly grounded.  Always use the AC cords listed below for each    

                 

area: 

 USA 

.........................…….UL 

 

 

 Canada 

.............…………CSA 

 Germany 

...........…………VDE 

      

Switzerland ............……. .SEV 

                                                 Britain ................…………BASEC/BS 
 

Japan ..............………….. Electric Appliance Control Act 

 
Use an AC cord in other areas that meets local safety standards. 

Summary of Contents for PL201M






















Reviews: