10
Installing the Display Driver
Before you install the driver, remove any previously installed display driver for
the graphics card from your system.
To install the driver
1 Start the system. Click
Cancel
on the Found New Hardware Wizard dialog.
Click
No
when the system prompts you to restart the computer.
2 Insert the driver installation CD and run
Setup.exe
.
3 Click
Next
.
4 Click
Yes
to the license agreement. The installation starts.
5 Follow the onscreen instructions to complete the installation.
Planar recommends that you select the Express installation option.
6 When the Setup complete message appears, select
Yes, I want to restart
my computer now
and click
Finish.
7 If the Digital Signature Not Found message appears, click
Yes
or
Continue
to
complete the driver installation.
To set the display mode manually
1 Right-click the desktop and select
Properties > Settings
.
2 Select the monitor that you want to change. Then click
Advanced
.
3 Click the
Monitor
tab. Make sure that the check box for
Hide modes that this
monitor cannot display
is empty (unchecked).
4 Click the
Adapter
tab, then click the
List All Modes
button.
5 Choose the mode and click
OK
. Then click
Apply
or
OK
.
020-0509-00A GX3MP_2.indd 10
020-0509-00A GX3MP_2.indd 10
8/7/06 4:16:45 PM
8/7/06 4:16:45 PM