20 | Dome EX Display
Dome E3 Specification
Model 933-0545-xx
In locations where 240V outlets are used, connect the Dome E3 display to only a center-
tapped, 240V, single-phase supply (only for Canada and the United States).
Category
Characteristic Item
Specification
Screen
Screen size diagonal
541 mm (21.3 in.)
Resolution
1536 x 2048 pixels (portrait)
2048 x 1536 pixels (landscape)
Pixel pitch
0.2115 mm, 120 ppi
Pixel arrangement
Subpixel vertical stripe
Active area (mm)
433.2 (H) x 324.9 (V)
Color supported
256 shades of gray, programmable gamma from
palette of up to 3061 shades
Refresh rate
60 Hz
Contrast ratio
700:1 (typical)
Brightness
800 cd/m
2
(typical)
Pixel rise/fall time
35 ms
Viewing angle
170° (± 85°) horizontal/vertical
Interface
Digital Video In
DVI Rev. 1.0 digital dual-channel connector
Display control - brightness/contrast DDC2B+
Display identification
EDID read using DDC2B+
USB hub
Universal Serial Bus (USB) Rev. 1.1:
1 uplink B port; 2 downlink A ports
Display status
Dual-stack tricolor LEDs on back panel
Input formats
Landscape orientation
2048 x 1536 (8- and 24-bit per pixel)
Portrait orientation
1536 x 2048 (8- and 24-bit per pixel) with
automatic hardware rotate
VGA to SXGA
640 x 480 to 1280 x 1024 pixels displayed in
both landscape and portrait rotations
Screen type
AMLCD
(active-matrix liquid crystal display)
Physical
Display size (without stand)
475 mm x 368 mm x 96 mm
(18.7 in. x 14.5 in. x 4.0 in.)
Display weight (without stand)
9.07 kg (<20 lb) estimated
Mounting options
Desktop stand with integrated USB (standard);
100-mm VESA mounting (optional)
Power
Adapter
Ault MW122RA1223F52 (CAUTION: Use only the
power adapter supplied with the display unit.)
