QUICK LINKS
GETTING STARTED
INSTALLING THE DISPLAY
APPENDIXES
1
Dome C3i Display
About the Dome C3i Display
The Dome C3i display system consists of a 528-mm (20.8-in.), TFT LCD panel and
a DX2 controller and driver. The display’s thin film transistors, in a transmissive-type
display, use an integrated cold cathode fluorescent tube (CCFT) backlight system.
The display is designed for 3-megapixel (1536 x 2048) grayscale medical imaging in
diagnostic settings, in either portrait or landscape orientation. It comes fully tuned
with gamma correction that complies with the DICOM Part 14 Standard. An all-
digital design enables the display to produce the sharp, crisp images critical to
softcopy medical viewing. Unwanted analog display image artifacts, such as noise,
jitter, ghosting, and image smearing are eliminated.
The Dome C3i display offers the following key features. See the
more information.
•
3061 distinct shades of gray
•
IPS LCD technology for distortion-free image over a wide-viewing angle
•
Accelerated hardware rotation for viewing in portrait or landscape mode
•
Calibrated to DICOM response curve
•
Automated calibration and backlight stabilization through RightLight technology
The
enhances the functionality of the Dome C3i display.
Dome CXtra provides a range of value-added services, such as DICOM calibration,
error reporting, and backlight saver. An optional validation package extends the
CXtra services to include display acceptance tests, using the recommendations of
the American Association of Physicists in Medicine, Task Group 18 and the German
standards test, and enterprise management.
Before installing the display system, review the
.
Once your display system is in operation, follow the guidelines for
servicing your unit.
Systems requirements
Computer system
PCI slot per board
50 MB hard disk space
256 MB RAM
CD-ROM drive
Operating system
Windows XP or Windows 2000
