4
Planar Battery System BAT24SI
QUICK LINKS
GETTING STARTED
USING THE BATTERY
MAINTAINING THE BATTERY
APPENDIXES
Install the Fuses
You need the three fuses and a #2 flathead screwdriver for this installation.
To install the fuses
1
Insert the two fuses for the battery into the ports on the rear of the enclosure.
Push the fuses in until you feel the connection. Repeat to install the fuse for
the output power.
2
Use a flathead screwdriver to secure each connection. Do not overtighten.
About the battery fuses
The Planar Battery System requires
two 6 A fuses (size 0.25 in. x1.25 in.;
F type). These are available from
any hardware store.
Securing the fuse connection
Use the screwdriver to turn the fuse
holder approximately a quarter to
the right, or until you feel it lock.
Do not overtighten.
