Plamen Tena Termo, Technical Instructions

Page: 24 / 64

CENTRAL HEATING FIREPLACE Tena Termo with 15 kW rated power is a product
from Plamen's product line which can meet all your needs in the best way. It is
constructed in a way to meet the basic heating needs of a smaller family house or
apartment. We advise you to CAREFULLY READ THESE INSTRUCTIONS which will
help you maximize the results from the very first use of the fireplace.
The fireplace is produced in high quality gray cast iron. Parts are sealed by water
resistant adhesive. The door and glass are sealed by adhesive material containing
glass fibers. An ashtray is placed under the firebox. The upper part of the firebox
houses the heat exchanger ('boiler') produced from high quality boiler plate of 4mm.
The primary air regulator is located below the firebox, on the fireplace door. The
firebox rear plate, under the boiler, features holes for inlet of secondary air, while there
is a slit above the glass acting as the tertiary air inlet which enhances the purity of
combustion and keep the glass clean.
TECHNICAL DATA:
MEASUREMENTS WxHxD: 75x75x52 cm
WEIGHT: 179 kg
RATED OUTPUT:
-direct heating 7,5 kW
-water heat 7,5 kW
FLUE OUTLET: Ø 1 5 0 mm
FUEL: Wood
Maximum operating pressure: 2 bar
Quantity of water in the boiler 9,5 l
Water connections ¾"
24