PL Engineering Z-Meter DX4091, User Manual, Page: 37 / 44

Z-Meter DX4091/ User Guide PL Engineering Ltd
ver. 1.02 (2022) page 37 of 44
Amendments
If it is necessary to make adjustments of the measurement results (to
update geometric dimensions, to change the standard temperature
T
0
, turn off/turn on correction coefficients), then such changes can be
made in the program Main Window:
-
adjustment of the standard temperature T
0
. Then the resistance
and conductivity value for the new one will be automatically
recalculated T
0.
- change (re-define) sample dimensions, which will also
automatically lead to conduction recalculation. And also the
program will adjust the value of the amendments and recalculate
the quality.
-
disable/enable measurement corrections. Which will lead to a
measurement of the result by quality.
These (any of the above) changes activate the «Add to History
button».