PL Engineering Z-Meter DX4091, User Manual, Page: 25 / 44

Z-Meter DX4091/ User Guide PL Engineering Ltd
ver. 1.02 (2022) page 25 of 44
D. Repeat the second piece of
wire in the same way. You get a
frame with two pieces of wire
soldered across.
Note! If you intend to use other contact wires (than Pt) or a
diameter other than the recommended (50 μ m), or another
frame contact (different length of wires) or even other types
of wires. The appropriate changes must be made to the
measurement program settings.
Go to section 3.1.3 "Software"
3.2.4. Pellet sample mounting
Prepare materials and equipment (Table 4).
Follow the instructions:
Take the test sample of a
thermoelement of suitable size
(Table 3).
Note!
Working thermoelements are used to manufacture
thermoelectric modules. This means that the thermoelements
must have already special coating on two sides - barrier layer
(usually nickel) and a layer of tin (or gold) for soldering on the
ends.