~
57
~
6.2 Carbon filters
WARNING!
Switch off the appliance and disconnect it from the mains
before you install any carbon filters (use the relevant fuse in your
household fuse box).
C
ARBON FILTERS
for your extractor hood are
optional
available.
❖
Conventional carbon filters
cannot
be cleaned.
❖
The capacity of these filters is limited. You can use such filters for about 3 - 6
months approx.
❖
Replace used filters immediately. Find further information on the filter packaging.
R
EPLACEMENT INTERVAL FOR CARBON FILTERS
➢
At least every
3 - 6 months
according to the frequency of use of the extractor
hood.
You can order the
CARBON FILTERS
at
www.pkm-online.de
➢
Type name of the
CARBON FILTERS
: See chapter T
ECHNICAL DATA
6.3 Replacing of the illuminant
WARNING!
Switch off the appliance and disconnect it from the mains
before you replace the illuminant (use the relevant fuse in your household
fuse box).
NOTICE!
Do not touch the illuminant with your hands. The sweat on your
fingers will reduce the operating time of your new illuminant. Use a thin
cloth or a thin glove.
1.
The illuminant should have cooled down before you remove it.
2.
Open the extractor flap and remove the grease filter. Release the screw of the
holder of the LED lamp on the right and left side and unplug it.
3.
Take the new LED lamp (available
in our accessories shop “Zubehörshop” on
or order it by phone +49 (0) 2841/ 178738) plug the
connector back in and fix with both screws. Put the grease filter back and close
the flap.
