~
49
~
14.
Insert the grease filters and connect the appliance to the mains
7
.
Check the correct position of the hood from front and side perspective.
Otherwise the appliance will not work properly.
2.3 Electrical connection
Check that the voltage indicated on the rating plate matches the mains voltage of
your home before connecting the extractor hood to the mains.
Check that the extractor hood is installed properly before you connect the
appliance to the mains.
3. Extraction mode / Recirculation mode
3.1 Extraction mode
WARNING!
Do not lead the exhaust air into a chimney which is used
for extracting exhaust air of appliances operated by gas or other
combustibles.
❖
The extractor hood is usually ready for the use in extraction mode.
❖
In extraction mode, the intake air is led through an exhaust hose to the outside.
For this purpose, an exhaust shaft or an outwardly leading exhaust pipe must be
available in your house / flat.
If your appliance is equipped with a carbon filter, you
must
remove the carbon
filter before you operate the appliance in the extraction mode!
If you want to use the extractor hood in extraction mode, please always
observe the instructions given in chapter 2. I
NSTALLATION
and in chapter
2.2 I
NSTALLATION STEPS
, step 8.a. I
NSTALLATION OF THE CHIMNEY
/
E
XTRACTION MODE
.
3.2 Recirculation mode
❖
You can also use the appliance in recirculation mode.
❖
In recirculation mode, the exhaust air is led back into the kitchen.
7
If the socket is covered by the chimney, you must plug in the appliance at an earlier point in time.
