34
Setting of the timer
1.
You can set the timer only while the appliance is operating.
2.
Press the T
IMER
-
BUTTON
: The appliance enters the stand-by mode.
3.
The maximum delay time until stop of operation is 9 minutes. The remaining
running time is displayed in descending order (9 8 7 etc.). When the set delay
time has elapsed, the appliance is switched off automatically.
4.
Press the T
IMER
-
BUTTON
to confirm the setting.
5.
Press the T
IMER
-
BUTTON
while the appliance is operating in the timer-mode to
cancel the timer mode.
3.2 Reduction of the environmental impacts of cooking
Cover your pot/pan with lid during cooking.
Switch off the appliance after cooking or use the delayed switch-off function
(equipment depends on model).
Switch off the illuminant(s) of the appliance after cooking.
The diameter of the pot/pan should meet the diameter of the cooking zone or
the size of the flame of the burner (gas appliances).
Only operate the highest motor speed of the appliance to extract strong
concentration of cooking fumes.
Clean the grease filter(s) regularly as clean filters will increase the efficiency of
the appliance.
Replace carbon filters (for recirculation mode only) regularly. Observe the
information given on the packaging of the carbon filters.
4. Cleaning/maintenance
WARNING!
Disconnect the appliance from the mains before you clean or
maintain it.
Ignoring the cleaning and maintenance instructions will cause an
increased risk of fire.
NOTICE!
Take off all rings and bracelets before cleaning or maintaining the
appliance; otherwise you will damage the surface of the appliance.
1.
Clean the housing of the appliance with a suitable detergent. Use such a product
carefully and economically.
