33
3. Operation
3.1 Control panel
CAUTION!
The lamp must not be covered by thermal insulation or
other materials. Do not touch the illuminant within 30 minutes after
operation.
NOTICE! Only switch on the lights while the appliance is operating. Do
not switch on the lights to lighten the room.
As soon as you have connected the appliance to the mains the backlight of the
buttons goes on. The backlight goes off if you have not made any input within
30 seconds. The appliance will enter the stand-by mode.
Timer
1.
See below for setting information..
Lamp.
1.
Press once: light on.
2.
Press again: light off.
Motor speed.
1.
Press once and the appliance operates using
LOW
motor speed.
The display indicates 1.
2.
Press again and the appliance operates using
MEDIUM
motor
speed. The display indicates 2.
3.
Press again and the appliance operates using
HIGH
motor speed.
The display indicates 3.
4.
Press again and the motor speed is reset to
LOW
, so the operating
sequence is:
LOW
→
MEDIUM
→
HIGH
→
LOW
→
MEDIUM
...etc.
On/Off
1.
Press once and the appliance operates using the previously-set
motor speed.
2.
Press again and the appliance stops operation.
