39
A(mm) B(mm) C(mm) D
E
760
50 min. 30 min. Air inlet Air outlet 5 mm
Installation
(1)
Before installing the hob, the adhesive seal has to be fixed on the
bottom
edge
of the hob properly.
The seal has to be fixed properly. The outer side of the seal must match the
bottom outer edge of the hob (s. fig. below). The seal
must be
fitted tightly
on the bottom edge of the hob (no overlaps, no gaps etc.) to prevent liquids
etc. from entering the installation opening subsequently.
1.
Seal
2.
Hob
3.
Worktop
4.
Outer edge of the hob
5.
Outer side of the seal
6.
Bottom of the hob
1
6
