~
151
~
E
RROR
P
OSSIBLE CAUSE
(
S
)
M
EASURES
C
LOUDINESS ON GLASSWARE
.
1.
Soft water in combination with too
much detergent.
1.
If you have soft water, use less
detergent. Select a short programme
for glassware.
W
HITE FILM ON INNER SURFACES
.
1.
Minerals in hard water.
1.
Clean the interior with a soft sponge
and dishwasher detergent. Wear
rubber gloves! Use dishwasher
detergent only to avoid formation of
foam.
T
ABLEWARE IS NOT DRIED PROPERLY
.
1.
Improper use of the dish rack.
1.
Load the dish rack properly.
2.
Not enough rinse aid.
2.
Check the quantity of the rinse aid.
Refill if needed.
3.
Tableware has been removed from
the appliance too early.
3.
Wait at least 15 min., before you
remove the tableware.
4.
Cutlery and tableware are made of
low-quality materials.
4.
Do not clean such items using the
appliance.
S
OME DETERGENT IS LEFT IN THE CONTAINER
.
1.
Dishes block the container of the
detergent
1.
Place the dishes properly.
S
TEAM
.
1.
Normal.
1.
There is some steam coming through
the vent near the door latch during
drying and water draining.
B
LACK OR GREY SPOTS OR RUST SPOTS ARE ON THE TABLEWARE
.
1.
Aluminium-made objects touched
the dishes.
1.
Clean the marks with a mild abrasive
cleaner
by hand.
2.
The items are not corrosion
resistant.
2.
Do not clean such items using the
appliance.
3.
The lid of the water softener
container is not close properly.
3.
Close the lid properly.
4.
You have not started a programme
after you added the water softener.
The remaining water softener is now
affecting the running programme.
4.
Always start the rapid programme
without adding any tableware when
you have added some water softener.
