~
114
~
S
ET WATER
HARDNESS LEVEL
W
ATER SOFTENER IS ADDED
:
W
ATER SOFTENER
CONSUMPTION IN
GRAMME
/
PROGRAMME RUN
H 1
no
water softener is added.
0
H 2
every
10th
programme run
9
H 3
every
5th
programme run
12
H 4
every
3rd
programme run
20
H 5
every
2nd
programme run
30
H 6
each
programme run
60
Each programme run with a water softener supply consumes an additional 2.0
litres of water, the energy consumption increases by 0.02 kWh and the respective
programme duration is extended by 4 minutes.
4.1.3 Setting of the water softener consumption
❖
It is required to set the proper amount of the water softener based on the water
hardness range to optimise and customise the water softener consumption.
❖
You can set the consumption of water softener from
H 1
to
H 6
. Water softener
is
not required
when the value
H 1
is set.
Six water softener consumption levels can be selected. The water softener
consumption level should always be set
according to the water hardness
of
your region. We recommend setting the level relevant to the table of the water
hardness range above (s. chapter 4.1.2 W
ATER HARDNESS LEVELS
/
WATER
SOFTENER CONSUMPTION
).
You need to get the information on the local water hardness range. You can
receive all relevant information from your local water supplier.
S
TEP
1:
ENTER WATER SOFTENER SETTING MODE
1.
Open the door.
2.
Switch on the appliance using the « O
N
/ O
FF
» -
BUTTON
(s. chapter 3.2 V
IEW
OF THE CONTROL PANEL
:
OPERATING BUTTONS AND INDICATORS
).
3.
Within 60 seconds
after you have switched on the appliance, press and
hold
the
« P
ROGRAMME
» -
BUTTON
for more than 5 seconds
.
4.
The appliance is now in water softener setting-mode.
