~
138
~
The programme function « D
ELAYED
PROGRAMME
START
» may not be available
for all cleaning programmes (see also chapter 6.1 T
HE ADDITIONAL PROGRAMME
FUNCTIONS
).
H
OW TO ACTIVATE THE PROGRAMME FUNCTION
« D
ELAYED
PROGRAMME
START
»
1.
Switch on the appliance using the « O
N
/ O
FF
» -
BUTTON
.
2.
The appliance is now in
STANDBY MODE
.
3.
Set the desired cleaning programme using the « P
ROGRAMME
» -
BUTTON
. Use
the corresponding buttons to set the desired additional programme functions.
Always observe the instructions in chapter 6.2 S
TARTING OF A CLEANING
PROGRAMME
.
4.
The programmable delay period is 3, 6 or 9 hours. To activate the delayed
programme start, press the « D
ELAY
» -
BUTTON
(«
»)
repeatedly
until the
operational status indicator of the desired delay period (3, 6 or 9 hours) goes on.
Each press of the « D
ELAY
» -
BUTTON
increases
the delay period by three hours.
5.
Close the door of the appliance properly.
6.
The set cleaning programme starts
automatically
after
the set delay time has
elapsed.
If the selected cleaning programme cannot be combined with the desired
programme function(s), these functions cannot be selected or will be cancelled
and the indicators switches off automatically.
P
ROGRAMME FUNCTION
:
« H
ALF LOAD
»
❖
The programme function «
H
ALF
LOAD
» can be set for some cleaning
programmes.
❖
Select this programme function if you want to clean
max.
six place settings
or
less
. If you put more than six place settings in the appliance and still select this
programme function, the cleaning effect of the appliance may be reduced.
❖
The energy and water consumption of a cleaning programme may be reduced by
this programme function.
NOTICE!
Do not use
this programme function when the dishwasher is
fully loaded
, otherwise the cleaning effect of the appliance will be
reduced.
The programme function « H
ALF
LOAD
» may not be available for all cleaning
programmes (see also chapter 6.1 T
HE ADDITIONAL PROGRAMME FUNCTIONS
).
