21
1.
The appliance must be connected to the mains by a qualified professional, who
is familiar with and adheres to the local requirements and supplementary
regulations of your energy supplier.
2.
All electrical work must be carried out by a qualified professional. Do not modify
the energy supply. The connection must be carried out in accordance with the
current local and legal regulations
3.
Do not connect
the appliance to the mains if the appliance itself or the power
cord or the plug are visibly damaged.
4.
Never try to repair the appliance yourself. Repairs carried out by unauthorized
persons can cause serious damage. If the appliance does not operate properly,
please contact the shop you purchased the appliance at. Original spare parts
should be used only.
5.
When the power cord is damaged, it must be replaced by the manufacturer or an
authorized aftersales service or a qualified professional only.
WARNING!
1.
Disconnect the appliance from the mains before you clean or maintain it.
2.
The appliance must always be grounded and protected corresponding to the
requirements of your local energy supplier. The main current circuit must be
equipped with a safety shut-down device.
3.
All modifications to the electrical mains to enable the installation of the appliance
must be performed by a qualified professional.
4.
In case of an event caused by a technical malfunction, disconnect the appliance
from the mains. Report the malfunction to your service centre so it can be
repaired.
5.
Do not use adapters, multiple sockets and extension cords for connecting the
appliance to the mains.
6.
Do not carry out any modifications to your appliance.
7.
The room the appliance is installed in must be dry and well-ventilated. When the
appliance is installed, an easy access to all control elements is required.
8.
The veneering of cabinets has to be fixed with a heat-resistant glue, that is able
to withstand a temperature of 120
0
C.
9.
Adjacent furniture or housing and all materials used for installation must be able
to resist a temperature of min. 85
0
C above the ambient temperature of the room
the appliance is installed in during operation.
10.
Remove the back of the kitchen unit to ensure adequate ventilation around the
appliance. The appliance must have at least 45 mm of free space at its back.
11.
Do not install the appliance in rooms or at areas which contain flammable
substances as petrol, gas or paint. This warning also refers to the vapour these
substances release.
12.
Cooker-hoods should be installed according to their manufacturers' instructions.
