~
84
~
4.2.1 General operation of the oven
❖
The operation of the oven is controlled by the operating buttons and the rotary
knobs for the selection of the
OVEN FUNCTIONS
and for the
TIME
and
TEMPERATURE SETTING
(
A
/ B / s. chapter 3.2 C
ONTROL PANEL
).
❖
Eight different oven functions and a pyrolytic self-cleaning programme are
selectable; s. chapter 4.7 O
VEN FUNCTIONS AND SELF
-
CLEANING PROGRAMME
.
❖
The temperatures of the
oven functions
can be set within a range of 50
0
C - 250
0
C individually. The default temperature of the pyrolytic self-cleaning programme
is factory-set and
cannot
be changed; see also chapter 4.7 O
VEN FUNCTIONS AND
SELF
-
CLEANING PROGRAMME
.
Please note
: the individual setting of the temperature and / or cooking time may
not be available for all oven functions.
28
When the temperature inside the oven has almost reach the set temperature, an
acoustic signal sounds for 2 seconds.
If the temperature inside the oven
falls below
30
0
C, the indicator of the
temperature displays «
Lo
».
After the oven has been in operation for about 15 minutes, the cooling fan starts
to work. After the end of operation, the cooling fan still continues to run for a
while (approx. 35 minutes), even if the appliance itself is switched off. When the
temperature inside the oven
falls below
100
0
C, the cooling fan is switched off
automatically.
The appliance is equipped with a
24-hour display.
N
OTES REGARDING THE SELF
-
CLEANING PROGRAMME
:
❖
The appliance is equipped with a
pyrolytic
self-cleaning programme.
The default temperature of the self-cleaning programme is
factory-set
and
cannot be changed
.
If you wish to use this programme, strictly observe the relevant instructions
given in the chapters
4.4 P
YROLYTIC SELF
-
CLEANING PROGRAMME
and 4.7
O
VEN FUNCTIONS AND SELF
-
CLEANING PROGRAMME
.
WARNING!
The appliance
must not
leave unattended during the
pyrolytic self-cleaning process.
28
Depending on model.
Summary of Contents for EBO8 DPY
Page 72: ...72 FIG 1...